#18203: "Swiss tournament pairing improvement: ranking based pairing"
Kaj se je zgodilo? Prosimo, izberi spodaj
Kaj se je zgodilo? Prosimo, izberi spodaj
Prosimo preverite ali že obstaja poročilo o isti zadevi
Če je tako, GLASUJTE za to poročilo. Poročila z največ glasovi se obravnavajo PREDNOSTNO!
# | Status | Votes | Game | Type | Title | Last update |
---|
Natančen opis
• Kopirajte / prilepite sporočilo o napaki, ki ga vidite na zaslonu, če ga imate.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Prosim, pojasnite, kaj ste hoteli storiti, kaj ste naredili in kaj se je zgodilo
• Kateri brskalnik uporabljaš?
Google Chrome v81
• Kopirajte / prilepite besedilo, prikazano v angleščini, namesto v vašem jeziku. Če imate sliko zaslona te napake (dobra praksa), lahko uporabite Imgur.com za nalaganje in kopirate/prilepite povezavo do slike tukaj.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Je ta tekst dosegljiv v prevajalnem sistemu? Če ja, ali je bil preveden več kot 24 ur nazaj?
• Kateri brskalnik uporabljaš?
Google Chrome v81
• Natančno in jedrnato pojasnite svoj predlog, da bo čim lažje razumeti, kaj mislite.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Kateri brskalnik uporabljaš?
Google Chrome v81
• Kaj je bilo prikazano na zaslonu, ko ste bili blokirani (prazen zaslon? Del vmesnika za igro? Sporočilo o napaki?)
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Kateri brskalnik uporabljaš?
Google Chrome v81
• Kateri del pravil ni bil upoštevan pri priredbi za BGA
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Je kršitev pravil vidna na seznamu potez? Če je, pri kateri številki poteze?
• Kateri brskalnik uporabljaš?
Google Chrome v81
• Katero potezo ste želeli narediti v igri?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Kaj ste poskušali narediti, da bi izvedli to potezo v igri?
• Kaj se je zgodilo, ko ste poskusili to storiti (sporočilo o napaki, sporočilo v vrstici stanja, ...)?
• Kateri brskalnik uporabljaš?
Google Chrome v81
• Na kateri točki v igri se je težava pojavila (katera navodila so bila prikazana)
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Kaj se je zgodilo, ko ste poskušali narediti to potezo v igri (sporočilo o napaki, sporočilo v vrstici stanja, ...)?
• Kateri brskalnik uporabljaš?
Google Chrome v81
• Prosim opiši problem s prikazom. Če imate sliko zaslona te napake (dobra praksa), lahko uporabite Imgur.com za nalaganje in kopirate/prilepite povezavo do slike tukaj.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Kateri brskalnik uporabljaš?
Google Chrome v81
• Kopirajte / prilepite besedilo, prikazano v angleščini, namesto v vašem jeziku. Če imate sliko zaslona te napake (dobra praksa), lahko uporabite Imgur.com za nalaganje in kopirate/prilepite povezavo do slike tukaj.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Je ta tekst dosegljiv v prevajalnem sistemu? Če ja, ali je bil preveden več kot 24 ur nazaj?
• Kateri brskalnik uporabljaš?
Google Chrome v81
• Natančno in jedrnato pojasnite svoj predlog, da bo čim lažje razumeti, kaj mislite.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Kateri brskalnik uporabljaš?
Google Chrome v81
Zgodovina poročil
Dodaj nekaj k temu poročilu
- Drug ID mize/ premikanje ID-ja
- Ali je F5 rešil težavo?
- Se je problem pojavil večkrat? Vsakič? Naključno?
- Če imate sliko zaslona te napake (dobra praksa), lahko uporabite Imgur.com za nalaganje in kopirate/prilepite povezavo do slike tukaj.